USB Relay Controller - One Channel Box- HyperTerminal ASCII commands
- Product Code: U1CRBASCII
- Availability: 953
- 31.20 €
- Ex Tax: 26.00 €
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control a single external device using simple RS232 commands. Relay is fully powered from the USB bus.
Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• It can be used with HyperTerminal
Complete including:
- One USB relay board
Dimensions:
100 mm / 58 mm / 24 mm
Typical Applications:
- Home automation
- Industrial automation
Drivers are available to work with the following operating systems:
Windows(all versions), Linux, Mac OS 8, Mac OS 9, Mac OS X, Arduino, Raspberry PI ...
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
r01 0 & ENTER - OFF command
r01 1 & ENTER - ON command
r01 ? & ENTER - Read Status command
(1 - Relay is ON, 0 - Relay is OFF)